���������������������������[  Here are your words ]��������������������������
Now that I've got your attention...... I have a 7 disk changer operating with
the BBS, I also have an internal CD-ROm that I would like to include in the
system, but I can't get the single to load, either before the 7 disk changer,
or before. Is there a secret to this madness?
King-Marshall and The Cat in the Hat [VSB]
 ���������������������������[  This is my response ]��������������������������

Yes. First Load the Device:
DEVICE = C:\where\CDROMDRIVER.SYS /D:MSCD00x    Make 'x' 1-9
Load your Pioneer:
DEVICE =C:\WHERE\PINEER.SYS /D:MSCD00x (where x is DIFFERENT from ABOVE)

In AUTOEXEC:
C:\MSCDEX /D:MSCD00x (eitherone) /v /D:MSCD00x (the otherone) /v /e(if used)

Must specify BOTH Driver tags on the same line for MSC to map the drives.
You can do this with an unlimited number. I currently map 4 physical drives,
which provide 16 disks all from one instance of MSCDEX.

     *****Merlin*****
     ================

        Excaliber BBS  �     VNET@1610025 VBBS Ver. 7.00.02
        �������������������������������������������������
         Supra 28.8V34 � (610)488-0299 USR VEverything(488-9194)